Calculate masses of alcohol and ether

Assignment Help Chemical Engineering
Reference no: EM13884073

Allyl alcohol can be produced by the hydrolysis of allyl chloride. Together with the main product, allyl alcohol, diallyl ether is produced as a byproduct. The conversion of allyl chloride is typically 97% and the selectivity to alcohol is 90%, both on a molar basis. Assuming that there are no other significant side reactions, calculate masses of alcohol and ether produced, per 1000 kg of allyl chloride fed to the reactor.

Reference no: EM13884073

Questions Cloud

Blueboy cheese corporation is presented below : 1.The December 31, 2013, adjusted trial balance for the Blueboy Cheese Corporation is presented below.
Pertaining to the case study alabama''s confederate flag : Pertaining to the case study Alabama's Confederate Flag Controversy (The Electronic Hallway), I believe the central problem is that there is a social and political controversy surrounding the fact that the confederate flag is flying over the capital...
Calculate the enthalpy change for reaction : Calculate the enthalpy change for this reaction
What ethical and/or legal issues may emerge : What ethical and/or legal issues may emerge for the health care team when health care providers/agencies provide end of life care for persons who lack the cognition required to assert autonomy and presumably experience suffering? 2. Share your person..
Calculate masses of alcohol and ether : Assuming that there are no other significant side reactions, calculate masses of alcohol and ether produced, per 1000 kg of allyl chloride fed to the reactor.
Construct a spreadsheet model to evaluate the situation : Lawn mowing. John's father has a motorized lawn mower. He borrowed it to earn extra money during the summer mowing the neighbors' front yards. He charges $18 for each front yard and employs a classmate at $7 a day to help. He can do at most 8 yards i..
Develop an annotated bibliography : For this Assignment, develop an annotated bibliography that focuses on an information technology  topic of your own choosing. Suggestions for topics could include information security, online privacy,  digital forensics, or the Internet of Things.
Nitrogen separation process : If the feed contains 0.2% argon (from the nitrogen separation process), calculate the purge rate required to hold the argon in the recycle stream below 5.0%. Percentages are by volume.
What type of sampling method is this employee using : What is sampling error and what factors contribute to how big a sample you should use?

Reviews

Write a Review

 

Chemical Engineering Questions & Answers

  Determine blood urea concentration as a function of time

5. A patient is placed on a kidney dialysis unit three times a week. The dialyzer has a membrane area of 1 m2 and is operated in a countercurrent mode. The blood flow rate is 200 ml/min and the dialysate flow rate is 500 ml/min. Membrane permeability..

  Calculate atomic packing

The unit cell for Cr2O3 has hexagonal symmetry with lattice parameters a = 0.4961 nm and c = 1.360 nm. If the density of this material is 5.22 g/cm3, calculate its atomic packing factor.

  Suitable type of centrifuge

The viscosity of the liquor is 0.7 mN m-2 s. The cutoff crystal size required is 5 μm. Select a suitable type of centrifuge to use for this duty.

  Methanol is synthesized from carbon monoxide

50. Methanol is synthesized from carbon monoxide and hydrogen in a catalytic reactor. The fresh feed to the process contains 32.0 mole% CO, 64.0% H2, and 4.0% N2. This stream is mixed with a recycle stream in a ratio S mol recycle/1 mol fresh feed to..

  Prepare a piping diagram and calculate the pipe size

Prepare a piping diagram and calculate the pipe size as well as the required power of the pump. You need to specify the type of fittings and the pipe material for your calculations.

  Carryover of liquid droplets

A vapor rate of 2500 kg/h is required and the vaporizer will operate at 6 bara. Size the vessel to restrict the carryover of liquid droplets. The liquid hold-up time need not be considered, as the liquid level will be a function of the thermal des..

  Introduction to petroleum engineering

Present/display a research paper with the topic Introduction to Petroleum Engineering,giving preferences to the changes that are generated through the discipline in our world today.

  Solve the initial value problem

Use Laplace transformation to solve the initial value problem

  Determining the average atomic weight

with an atomic weight of 51.9405 amu, 9.50% of 53Cr, with an atomic weight of 52.9407 amu, and 2.37% of 54Cr, with an atomic weight of 53.9389 amu. On the basis of these data, confirm that the average atomic weight of Cr is 51.9963 amu.

  Draw a catalytic cycle for one initermolecular

Analysis of these publications outline the chiral ligands used and draw a catalytic cycle for one initermolecular and one intramolecular reaction - the asymmetric Heck reaction

  Principles of a vapour adsorption refrigeration system

Describe the principles of a vapour adsorption refrigeration system, and compare this to a vapour recompression system. Which of the two systems is more suitable for refrigeration processes in a brewery or distillery and why?

  What percent of so 2 removal is required

1. A newly constructed power plant proposes to burn coal with a sulfur content of (a) 1.8 and (b) 2.4 percent by weight. If the plant is to meet the new source review performance standard (see attached CFR new source regulation), what percent of SO 2..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd