Calculate grid lengths for the traverse lines

Assignment Help Civil Engineering
Reference no: EM131147083

Assuming a scale factor for the traverse of Problem 20.27 to be 0.99996294, calculate grid lengths for the traverse lines.

Problem 20.27:

The horizontal ground lengths of a three-sided closed-polygon traverse were measured in feet as follows: AB = 501.92, BC = 336.03, and CA = 317.88 ft. If the average orthometric height of the area is 4156.08 ft and the average geoid separation is -23.05 m, calculate ellipsoid lengths of the lines suitable for use in computing SPCS83 coordinates. (Use 6,371,000 m for an average radius for the Earth.)

Reference no: EM131147083

Questions Cloud

Explain which of the four components of gdp had : In view of the weak economy of the last several years, explain which of the four components of GDP had, or is having, the greatest positive impact in our economy. Use the following historical tables to support your response.
What is the geodetic azimuth of the line : Similar to Problem 20.43, except the convergence angle is -1°02'20.7" and the arcto- chord correction is -0.6".
Advantages of our adversarial system : Explain the advantages and disadvantages of our adversarial system regarding the burden of proof falling on the government to prove the concurrence of the criminal act with a criminal mind
Describe the ethical lapses of both companies : Research two public companies of your choice who have had lapses in ethical standards. Write a research paper describing the ethical lapses of both companies and the consequences.
Calculate grid lengths for the traverse lines : Assuming a scale factor for the traverse of Problem 20.27 to be 0.99996294, calculate grid lengths for the traverse lines.
Discuss methods that may be used to estimate cost of equity : Requirement: There is no way to directly observe the cost of equity as a component of the weighted average cost of capital. Discuss two methods that may be used to estimate the cost of equity.
How does a person socialization affect their behavior : How do learning and socialization affect the worldview (the lens) through which a person sees and approaches the world? How does a person's socialization affect their behavior
Find the approximate risk free rate : The bid and ask discounts on the Treasury bill maturing in 67 days are 8.20 and 8.24, respectively. - Find the approximate risk-free rate.
What is attorney general role in relationship to policing : What is the Attorney General's Role in relationship to policing? Explain the impact on the local, state, and federal level

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Calculate how many lbs of co2 are produced per gallon

Diesel fuel has an average chemical formula of C12H23 and a density of 6.45 lb/gal. Calculate how many lbs of CO2 are produced per gallon of diesel burned (assume complete combustion).

  What soil conditions favor the use of belled caissons

What soil conditions favor the use of belled caissons?

  Determine the density index of the sand

The in-situ dry density of a sand is 1.72 Mg/m^3 . The maximum and minimum dry densities, determined by standard laboratory tests, are 1.81 and 1.54 Mg/m^3, respectively. Determine the density index of the sand.

  Suppose you are told that a process must achieve a

Suppose you are told that a process must achieve a 2.7 log removal of Giardia cysts.  What does that mean in terms of % remaining and % removal?

  Determine where the groundwater divide is located

In a water table aquifer bounded on the ends by rivers, the hydraulic conductivity is 50 m/day. The hydraulic heads at x = 0 and x = 1000 m are 100 m and 90 m, respectively.

  Calculate the peak bending moment for the 4x10 roof beam

Show a clear, dimensioned FBD for the 2x10 rafters. For the 2x10 rafters calculate the peak moment in units of ft. lb. For the 4x10 roof beam, assume the 4x10 roof beam is pinned to the subsequent 10ft section over each of the interior 4x4 columns. N..

  Calculate the ratio of the initial to final speed of sound

Air expands isentropically from 1.5 MPa and 60°C to 0.4 MPa

  How many resistors out of a package of 100 would you expect

Water is pumped 9 mi from a reservoir at elevation 100 ft to a second reservoir at elevation 210 ft. The pipeline connecting the reservoirs has a 54-in diameter. It is concrete and has an absolute roughness of 0.003. If the flow is 25 mgd and pumping..

  Calculate the viscous drag force on this plate

An engineer is designing a horizontal, rectangular conduit that will be part of a system that allows fish to bypass a damn. Inside the conduit a flow of water at 40 F will be divided

  What is the rate of water rise in the lake in one day

A river discharges at a rate of 500 cfs into a lake. The water is drawn from the lake at a rate of 200 cfs. The surface area of the lake is 60 acres (1 acre = 43, 560 ft2). What is the rate of water rise in the lake in one day

  A water treatment plant is being designed to process

A water treatment plant is being designed to process 50,000 m3/d of water. Jar testing and pilot-plant analysis indicate that an alum dosage of 40 mg/L with flocculation at a Gt value of 4.0 × 10^4 produce optimal results at expected water temperatur..

  What is the first order decay coefficient in day-1

A tank operated as a CFSTR used to remove benzene from a flow stream is 1500 m3 in size. The flow rate in and out of the tank is 8 m3/day. If the influent benzene concentration of 265 ug/L and the effluent concentration is 12 ug/L

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd