Axis of rotation passes through the beams center

Reference no: EM13560482

A uniform 5.93 m long horizontal beam that weighs 468N is attached to a wall by a pin connection that allows the beam to rotate. itsfar end is supported by a cable that makes an angle of 51 degrees with the horizontal, and a 582N person is standing 1.25m from the pin. assuming that the axis of rotation passes through the beam'scenter of mass, find the force F_T in the cable. answer in units of N.

Reference no: EM13560482

Questions Cloud

Determine the total charge enclosed gaussian surface : Charge of uniform volume density = 1uC/m^3 fills an infinitecylinder of radius +5.cm. The center of the cylinder is on the zaxis, and the cylinder is infinite along the positive and negativez. Determine the total charge enclosed gaussian surface

What is the time constant for the charging process : If a circuit has two resistors in a parallel series with resistances 4.0 kΩ and 2.0 kΩ and has two capacitors with capacities 3.0 μF and 6.0 μF and the capacitors begin to charge then what is the time constant for the charging process?

The temperature of the suns photosphere : The temperature of the Sun's photosphere is. Isotopes of a particular element in the periodic table have which nuclear property in common. Granulation on the surface of the Sun is caused by

What is the main optical element of a refracting telescope : What is the main optical element of a refracting telescope? A department store sells an "astronomical telescope" with anobjective lens of 30 cm focal length and an eyepiece lens of focallength 5 mm. What is the magnifying power of this telescope?

Axis of rotation passes through the beams center : a uniform 5.93 m long horizontal beam that weighs 468N is attachedto a wall by a pin connection that allows the beam to rotate. itsfar end is supported by a cable that makes an angle of 51 degreeswith the horizontal, and a 582N person is standing 1.2..

Child sit to maintain rotational equilibrium : A 461.1N child and a 114N child sit on either end of a 2.9m long seesaw. suppose a 280N child sits .196m from the 461.4N child. how far from the pivot must a 218N child sit to maintain rotational equilibrium?

Charges problem : A +30 µC charge is placed 40 cm from an identical +30µC charge. How much work would be required to move a +0.41µC test charge from a point midway between them to a point 5cm closer to either of the charges?

What is stopping distance now as measured along incline : When a car is traveling at 25 m/s on level ground, the stopping distance is found to be 22m. This distance is measured by pushing hard on the brakes so that the wheels skid on the pavement. The same car is driving at the same speed down an incline th..

Accounting multiple choice questions : Multiple Choice Questions (Enter your answers on the enclosed answer sheet) Anytime an owner removes any asset for personal use it is recorded as:

User Account

All Pages